Connector Configuration

Providing Configuration

For information about about how the connector detects configuration properties, see Spring Boot: Externalized Configuration.

Converting Canonical Spring Property Names to Environment Variables

For information about converting the Spring property names to environment variables, see the Spring documentation.

Spring Profiles

If multiple configuration files exist within the same configuration directory for use in different environments (development, production, etc.), use Spring profiles.

Using Spring profiles allow you to define different application property files under the same directory using the filename format, application-{profile}.yml.

For example:

• application.yml: The properties in non-specific files that always apply. Its properties are overridden by the properties defined in profile-specific files.
• application-dev.yml: Defines properties specific to the development environment.
• application-prod.yml: Defines properties specific to the production environment.

Individual profiles can then be enabled by setting the spring.profiles.active property. See Spring Boot: Profile-Specific Files for more information and an example.

Configuring Locations to Find Spring Property Files

By default, the connector detects any Spring property files as described in the Spring Boot’s default locations.

• If you want to add additional locations, add --spring.config.additional-location=file:<custom-config-dir>.

• If you want to exclusively use the locations that you’ve defined and ignore Spring Boot’s default locations, add --spring.config.location=optional:classpath:/,optional:classpath:/config/,file:<custom-config-dir>.

For example of the command to add additional locations, see Quick Start: Running the Connector Using the Command Line.

For more information about configuring locations to find Sprint property files, see Spring Boot documentation.

Obtaining Build Information

Build information that includes the version, build date, time, and description is enabled by default using the Spring Boot Actuator Info Endpoint. By default, a connector only shares information related to its build.

The following example shows the structure of the output data:

{
"build": {
"version": "<connector version>",
"artifact": "<connector artifact>",
"name": "<connector name>",
"time": "<connector build time>",
"group": "<connector group>",
"description": "<connector description>",
"support": "<support information>"
}
}

If you want to exclude build data from the output of the info endpoint, set management.info.build.enabled to false.

Alternatively, if you want to disable the info endpoint entirely, you can remove info from the list of endpoints specified in management.endpoints.web.exposure.include.

Spring Configuration Options

This connector packages use Spring configuration options to customize functionality that includes Spring Cloud Binder for Solace PubSub+ and other common Spring Boot libraries.

Using the Spring Cloud Binder for Solace PubSub+

An important piece for customizing the Spring configuration options for Self-Managed Connectors is the Spring Cloud Binder for Solace PubSub+. There are configuration options available that you may find useful to configure the connector such as:

• endpointType, which is a consumer configuration option to configure the type of endpoint (queue or topic endpoint) that consumers read messages from

• selector, which is a consumer configuration option to configure an endpoint's message selector

• producer configuration options to publish messages within transacted sessions

• authentication schemes to connect to a PubSub+ event broker, such as basic authentication (default) , client certificate, or OAuth 2.0

For more information about:

• Other configuration options available for the Spring Cloud Binder for Solace PubSub+ and detailed information for the configuration options in the list above, see the Solace Binder Configuration Options.
• The latest, supported features for the Spring Cloud Binder for Solace PubSub+, see the Spring Cloud Binder for Solace PubSub+ release notes.

Using Other Spring Boot Libraries

The following are other common references to Spring Boot libraries that you can use to configure your connector that you may find useful:

• Spring Cloud Stream

• Spring Logging

• Spring Actuator Endpoints

• Spring Metrics

Amazon SNS Binder Configuration Options

FIFO Topics

To use FIFO (First-In-First-Out) Topics, you must provide both :

• a group ID
• a deduplication ID (though you can choose not to set it's value).

With this binder, you can set the message headers, message-group-id and message-deduplication-id as shown in the following table. For more information, see FIFO Topics.

Header Name	Type	Applies To	Description
message-group-id	string	Amazon SNS	The identifier for a distinct ordered message group within an Amazon SNS Topic. This identifier ensures that messages within the group are processed in the same order that they are sent. This parameter must be set and if not provided, Amazon SNS rejects the message with an error.
message-deduplication-id	string	Amazon SNS	A token used for deduplication of sent messages. When set, messages with the same deduplication identifier are not sent within a five-minute interval. If this parameter is not set:  For releases 1.5.0 and later; the PubSub+ replication group ID (solace_replicationGroupMessageId) is used as the deduplication identifier. For releases earlier than 1.5.0, the value remains unset.

Connector Configuration Options

The following table lists the configuration options. The following options in Config Option are prefixed with solace.connector.:

Config Option	Type	Valid Values	Default Value	Description
management.leader- election.fail-over.max-attempts	int	> 0	3	The maximum number of attempts to perform a fail-over.
management.leader- election.fail-over.back-off-initial-interval	long	> 0	1000	The initial interval (milliseconds) to back-off when retrying a fail-over.
management.leader- election.fail-over.back-off-max-interval	long	> 0	10000	The maximum interval (milliseconds) to back-off when retrying a fail-over.
management.leader-election.fail-over.back- off-multiplier	double	>= 1.0	2.0	The multiplier to apply to the back-off interval between each retry of a fail-over.
management.leader- election.mode	enum	(standalone|active_active| active_standby)	standalone	The connector’s leader election mode. standalone: A single instance of a connector without any leader election capabilities. active_active: A participant in a cluster of connector instances where all instances are active. active_standby: A participant in a cluster of connector instances where only one instance is active (i.e. the leader), and the others are standby.
management.queue	string	any	null	The management queue name.
management.session.*		See Spring Boot Auto-Configuration for the Solace Java API		Defines the management session. This has the same interface as that used by solace.java.*. See Spring Boot Auto-Configuration for the Solace Java API for more information.
security.enabled	boolean	(true|false)	true	Indicates whether security is enabled on the endpoints for the connector. When true, security is enable, otherwise, anyone has access to the connector’s endpoints.
security.users[<index>].name	string	any	null	The name of the user.
security.users[<index>].password	string	any	null	The password for the user.
security.users[<index>].roles	list<string>	admin	empty list (i.e., . read- only)	The list of roles that the specified user has. It has read-only access if no roles are returned.

Workflow Configuration Options

These configuration options are defined under the following prefixes:

• solace.connector.workflows.<workflow-id>.: If the options support per-workflow configuration and the default prefixes.
• solace.connector.default.workflow.: If the options support default workflow configuration.

Config Option	Applicable Scopes	Type	Valid Values	Default Value	Description
enabled	Per-Workflow	boolean	(true|false)	false	If true, the workflow is enabled.
transform-headers.expressions	Per-Workflow Default	Map<string,string>	Key: A header name. Value: A SpEL string that accepts headers as parameters.	empty map	A mapping of header names to header value SpEL expressions. The SpEL context contains the headers parameter that can be used to read the input message’s headers.
acknowledgment.publish-async	Per- Workflow Default	boolean	(true|false)	false	If true, publisher acknowledgment processing is done asynchronously. The workflow’s consumer and producer bindings must support this mode, otherwise the publisher acknowledgments are processed synchronously regardless of this setting.
acknowledgment.back- pressure-threshold	Per-Workflow Default	int	>= 1	255	The maximum number of outstanding messages with unresolved acknowledgments. Message consumption is paused when the threshold is reached to allow for producer acknowledgments to catch up.
acknowledgment.publish-timeout	Per-Workflow Default	int	>= -1	600000	The maximum amount of time (in milliseconds) to wait for asynchronous publisher acknowledgments before considering a message as failed. A value of -1 means to wait indefinitely for publisher acknowledgments.